微波辅助法制备氧化铜非酶葡萄糖传感器

采用微波辅助法制备了氧化铜(CuO)材料,其结晶度好,没有杂质,呈现片层堆叠而成的块状结构.以CuO材料修饰玻碳电极作为工作电极(CuO/GCE),饱和甘汞电极作为参比电极,铂丝电极作为对电极,在碱性条件下对葡萄糖溶液进行电化学性能检测.该传感器对520 nM到2.0 mM浓度范围内的葡萄糖溶液实现了优良的检测性能,灵敏度为2491.362μA·cm-2·mM-1,检测限为216 nM(S/N=3),在2 s内就可以完成反应.丙烯酸等物质对传感器的影响可以忽略,具有良好的抗干扰性.     

General one-loop formulas for $$H\rightarrow f\bar{f}\gamma $$ H → f f ¯ γ and its applications

The European Physical Journal C - Considering supergravity theory is a natural step in the development of gravity models. This paper follows the “algebraic“ path and constructs possible...     

Fused Indacene Dimers

Polycyclic hydrocarbons consisting of two or more directly fused antiaromatic subunits are rare due to their high reactivity. However, it is important to understand how the interactions between the antiaromatic subunits influence the electronic properties of the fused structure. Herein, we present the synthesis of two fused indacene dimer isomers: s-indaceno[2,1-a]-s-indacene ( s -ID ) and as-indaceno[3,2-b]-as-indacene ( as -ID ), containing two fused antiaromatic s-indacene or as-indacene units, respectively. Their structures were confirmed by X-ray crystallographic analysis. ¹H NMR/ESR measurements and DFT calculations revealed that both s -ID and as -ID have an open-shell singlet ground state. However, while localized antiaromaticity was observed in s -ID , as -ID showed weak global aromaticity. Moreover, as -ID exhibited a larger diradical character and a smaller singlet-triplet gap than s -ID . All the differences can be attributed to their distinct quinoidal substructures.     

Outstanding Quadratic to Septic Optical Nonlinearity at Dipolar Alkynylmetal-Porphyrin Hybrids

Porphyrins are important macrocycles with applications in several areas including therapy, catalysis, and sensing. Strong nonlinear optical (NLO) responses are the key to fully exploiting the potential of these biocompatible molecules. We herein report that certain metal-alkynyl donor/nitro acceptor-functionalized porphyrins are attractive candidates for NLO applications. We show that specific examples exhibit record quadratic optical nonlinearity, exceptional two-photon absorption, and outstanding three-photon absorption, and we report the first porphyrins that exhibit four-photon absorption. The two-, three-, and four-photon absorption maxima are found at the corresponding multiples of linear absorption bands that time-dependent density functional theory assigns as admixtures of porphyrin-localized π*←π and donor-porphyrin to porphyrin-acceptor charge-transfer transitions.     

Azide Ionic Liquids for Safe,Green, and Highly-Efficient Azidation Reactions to Produce Azide Polymers

Azide compounds are widely used and especially, polymers bearing pendant azide groups are highly desired in numerous fields. However, harsh reaction conditions are always mandatory to achieve full azidation, causing severe side reactions and degradation of the polymers. Herein, we report the design and preparation of two azide ionic liquids (AILs) with azide anion and triethylene glycol (E₃)-containing cation, [P_444E3][N₃] and [MIM_E3][N₃]. Compared with the traditional sodium azide (NaN₃) approach, both AILs showed much higher reaction rates and functional-group tolerance. More importantly, they could act as both reagents and solvents for the quantitative azidation of various polymeric precursors under mild conditions. Theoretical simulations suggested that the outstanding performance of AILs originated from the existence of ion pairs during the reaction, and the E₃ moieties played a crucial role. Lastly, after the reaction, the AILs could be easily regenerated, presenting a safer, greener, and highly efficient synthesis route for azide polymers.     

Tuning the Composition and Structure of Ni@MoC Nanosheets for Highly Active and Stable Electrocatalysis in Water Splitting

The conventional electrolytic water-splitting process for hydrogen production is plagued by high energy consumption, low efficiency, and the requirement of expensive catalysts. Therefore, finding effective, affordable, and stable catalysts to drive this reaction is urgently needed. We report a nanosheet catalyst composed of carbon nanotubes encapsulated with MoC/Mo₂C, the Ni@MoC-700 nanosheet showcases low overpotentials of 275 mV for the oxygen evolution reaction and 173 mV for the hydrogen evolution reaction at a current density of 10 mA ⋅ cm⁻². Particularly noteworthy is its outstanding performance in a two-electrode system, where a cell potential of merely 1.64 V is sufficient to achieve the desired current density of 10 mA ⋅ cm⁻². Furthermore, the catalyst demonstrates exceptional durability, maintaining its activity over a continuous operation of 40 hours with only minimal attenuation in overpotential. These outstanding activity levels and long-term stability unequivocally highlight the promising potential of the Ni@MoC-700 catalyst for large-scale water-splitting applications.     

Temperature‐Induced Transformation from Large Compound Vesicles to Worm‐like Aggregates by ABC Triblock Copolymer

Two triblock polymers, tetraaniline‐block‐poly(N‐isopropyl acrylamide)‐block‐poly(hydroxyethyl acrylate) (TA‐b‐PNIPAM‐b‐PHEA) and TA‐b‐PHEA‐b‐PNIPAM, were synthesized with unambiguous structure by a two step method. The difference of these two diblock polymers is the connection order of carboxyl group to block, e.g., carboxyl group to PNIPAM block for PNIPAM‐b‐PHEA and to PHEA block for PHEA‐b‐PNIPAM. Secondly, block tetraaniline was linked to the diblock polymer through amidation to yield the corresponding triblock copolymer. Both of them have almost the identical chemical compositions. The only difference is the connection order of each block in the triblock polymers. When they were self‐assembled at 45°C in a suitable solution, both of their aggregates have spherical shape with slight defects on their surface with the average diameter of about 400 nm. However, when their aggregate dispersion was cooled down to 20°C, only TA‐b‐PHEA‐b‐PNIPAM's morphology changed, forming worm‐like aggregates with the diameter of about 100–200 nm transformed from spherical aggregates. Both amphiphilic property and position of each block in this triblock copolymer are very essential for this morphology transformation. Since the worm‐like aggregates presented here by our group have hollow structure inside, its controlled release properties for doxorubicin were evaluated. Drug release experiment indicated that along with the temperature changes, the rearrangement of the intermediate layer structure caused morphology change in aggregate, thus accelerating the speed of drug release.     

硫酸肼比浊法测定微量硒

依据硒(Ⅳ)在以甘油为稳定剂,盐酸为反应介质的条件下,被过量硫酸肼还原,使体系形成稳定悬浊液的原理,建立了比浊法测定硒的方法。探讨了盐酸用量、甘油用量、反应温度和反应时间以及硫酸肼用量等5个关键因素的影响,确定了最佳测定条件。实验结果表明:大量的共存物质不干扰测定。在选定的实验条件下,线性方程为:ΔA750nm=12.725ρ+0.0076,在2.0×10-4~3.2×10-2mg·m L-1范围内线性关系良好,相关系数(R2)=0.9911,方法的检出限为1.2×10-4mg·m L-1。方法用于测定强化营养盐中总硒,回收率在97.0~103.5%之间,RSD为1.8%。     

Mesoporous‐Silica‐Functionalized Nanoparticles for Drug Delivery

The ever‐growing interest for finding efficient and reliable methods for treatment of diseases has set a precedent for the design and synthesis of new functional hybrid materials, namely porous nanoparticles, for controlled drug delivery. Mesoporous silica nanoparticles (MSNPs) represent one of the most promising nanocarriers for drug delivery as they possess interesting chemical and physical properties, thermal and mechanical stabilities, and are biocompatibile. In particular, their easily functionalizable surface allows a large number of property modifications further improving their efficiency in this field. This Concept article deals with the advances on the novel methods of functionalizing MSNPs, inside or outside the pores, as well as within the walls, to produce efficient and smart drug carriers for therapy.